Replay Connection

Please follow the below steps to save the incoming real-time data as replay data

• In Main View menu bar goto Settings > Options

• In the Options dialog click on the 'Data' tab

• Check on the option 'Append replay data'

• Click on the 'Add Instrument' button

• In the Add Instrument dialog click on the Add (+) button on the top left

• In the Instrument Manager View select the instrument of your choice and click on the Ok button

• Click Ok to save and close the Add instrument dialog

• Restart ArthaChitra

Now connect to any live connection and make sure to open the Level-I/Level-II stream to save the replay data. Opening a Chart or Time & Sales View or adding an instrument in the Market Scanner View etc will open the Level-I stream. Opening the DOM View or the Level-II view will open a Level-II stream.

If you open a Level-I stream then the Last along with the TOP level Bid/Ask data will be recorded. If you open a Level-II stream then the Last along with upto 5 (five) levels of Bid/Ask data will be recorded. High, Low data is calculated locally.

Note:

• The replay data as saved by ArthaChitra can take up considerable disk space. As such it is advisable to save replay data for a limited number of instruments only.

• Replay data are saved from incoming real-time data only. You cannot download historical replay data.

• The Replay Data can be found in the folder <My Document>\ArthaChitra 2\Data\<Instrument>\Replay

Once you have saved the replay data, you can play-back the same by following the below steps:

• In Main View menu bar goto Connection > Simulator > Replay

• In the Replay dialog select the replay date (of which replay data is saved)

• Set the time from where you want to start the play-back

• Set the replay speed. You can increase or decrease it on the fly.

• Click on the Play button